1. Equipment Field Verification: An on-site inspection and verification of processing and related equipment that was approved for use via an engineering peer review (EPR). This inspection and verification ensures that the correct equipment was installed for the intended use, that the equipment was assembled correctly per the engineering peer review, and that the necessary appurtenances and ancillary systems were installed correctly to work with the equipment. This verification also identifies the serial and model numbers of the equipment and cross references the serial and model numbers with the manufacturer to ensure the proper equipment was used and that the equipment is properly documented in perpetuity and that it is only used at its intended location.

2. Facility Field Verification: An on-site inspection and verification of the conditions, restrictions, layouts, and other fire code criteria contained within the fire protection engineer’s fire code compliance report. This inspection ensures that the correct number of control areas were built and were built using fire resistance rated construction, that hazardous solvents are stored in approved containers using approved methods, that any required fire protection systems are installed, and any of the other requirements outlined in the fire protection engineer’s report. The facility field verification is related to the equipment field verification, and can be considered an extension thereof, verifying that the processing process will take place in the code compliant environment specified in the fire protection engineer’s report.